Wire tools and equipment

This simple to use tool is perfect for smoothing the rough and often sharp ends of cut beading wire. Features a hardwood handle and 1.8mm bur. To use firmly insert the cut wire in the cup and twist. Use with any gauge craft or precious wire.

Place up to 5 wires onto the disc of the Wire Twister, then attach the wires to a sturdy object. Pull the wires taut, turn the crank and watch the wires twist. Use colour combinations to make great looking jump rings. Multiple twisted wires are stronger than single wires.

The Spiral Maker creates perfect spirals out of any soft wire 20 gauge 0.81mm and smaller. Use colorful spirals to embellish jewellery, scrapbooks and paper crafts. Use small pieces of the diameter wire you intend to make the spiral as a washer on the three screws. Tighten wing nuts and insert the same gauge wire into the device. Center the wire in the center hole and insert the twister handle so the wire is inside the slit on the handle. Twist the handle until the desired size of coil is reached up to a maximum of 16.0mm. Wire not included.

Create Snowflakes quickly and easily with these wire forms. Add beads to the spokes, loop the end with roundnose pliers and hang!
Contains 8 wire forms 9.5cm in diameter.
Not suitable for children under 6.

Create Snowflakes quickly and easily with these wire forms. Add beads to the spokes, loop the end with roundnose pliers and hang!
Contains 7 wire forms 11cm in diameter.
Not suitable for children under 6.

Create Snowflakes quickly and easily with these wire forms. Add beads to the spokes, loop the end with roundnose pliers and hang!
Contains 6 wire forms 15cm in diameter.
Not suitable for children under 6.

Create Snowflakes quickly and easily with these wire forms. Add beads to the spokes, loop the end with roundnose pliers and hang!
Contains 4 wire forms 23cm in diameter.
Not suitable for children under 6.

The Wyr Knittr uses 28, 30 or 32 gauge wire to knit mesh tubing for making jewellery, embellishing scrapbook pages and creating home decor accents. You can knit in beads by just droping them through the centre of the mesh or thread seed beads or small bugles onto the wire before knitting. The wire mesh can be flattened, compressed, braided, folded, twisted and more.
The kit includes three weighted clips, 18m of 30 gauge wire, spool clip, instructions and five patterns.

Use this Beadsmith 5 Step Mandril set to create consistently sized loops, circles & coils in wire. Made from stainless steel with a PVC grip, the smooth surface will not mar wire. Five diameters per tool.
Measurements of the small mandrel are: 1.5, 2.5, 3.5, 4.5 and 5mm
Measurements of the large mandrel are: 6, 7, 8, 9 and 10mm

Press and harden your wire designs using the Wire Whacker with your hand or a hammer. Easy to use, the Wire Whacker will work with almost any wire and will not mar, nick or scratch the wire. It may be used with Gold, Silver, Gold-Filled, Sterling Silver and Copper wire without fear of changing the diameter or damaging the wire.